Company
Production
Products
Fields of application
References
News
Partners
Contact
CWL-028-01
Plants for coil winding and insulation of high efficiency motors
galleryvideopdf
1540
CWL-040-02-20-30
HIGH FLEXIBLE COIL WINDING LINE FOR IEE 2 – 3 MOTOR EFFICENCY
galleryvideopdf
1570
Slot bottom insulating machine
model IFC7-FLEX

Machine for the automatic construction and insertion of insulating tiles on slot bottom for stators. High flexibility machine thanks to a quick change carriage, that allows to fit different equipment as statomat, magnaghi and pavesi. Standard machine supplied with all safeties for tool and operator.
galleryvideopdf
0100
Slot bottom insulating machine
model IFC7-FLEX-XL

Machine for the automatic construction and insertion of insulating tiles on slot bottom for stators. High flexibility machine thanks to a quick change carriage, that allows to fit different equipment as statomat, magnaghi and pavesi. Standard machine supplied with all safeties for tool and operator.
gallerypdf
0102
Slot bottom insulating machine
model IFCNV-11-30-45

Machine for the manufacture and automatic insertion of slot bottom insulation on stator of electric motors. The machine utilize a tape of insulating material as the development of stator’s slot, reducing at minimum the changeover times due to stack or lamination changing. The machine is fully programmable through control panel on number of slots and stack height. All movements are performed by electric motors managed from digital drives and pneumatic cylinders.
galleryvideopdf
0120
Slot bottom insulating machine
model IFCNV-21-35-55

Machine for the manufacture and automatic insertion of slot bottom insulation on stator of electric motors. The machine utilize a tape of insulating material as the development of stator’s slot, reducing at minimum the changeover times due to stack or lamination changing. The machine is fully programmable through control panel on number of slots and stack height. All movements are performed by electric motors managed from digital drives and pneumatic cylinders.
galleryvideopdf
0121
Exciter rotors insulating machine
model IFCR2

Machine for the automatic construction and insertion of insulating tiles on slot bottom and slot closing for rotors. High flexibility machine thanks to a quick tooling regulations that achieve to change rotor format in short time. Standard machine supplied with all safeties for tool and operator.
gallerypdf
0150
Insulant former
model ISTIL.02

Machine for the shaping and precisious cut of insulating tape for electric stators or rotors. Machine managed by digital programable instruments, that allow to set the lenght of shaped insulant and the number of pieces wanted. The regulation of shape type is done by manual wheels with mechanical counter on easy access for operator.
gallerypdf
0170
Automatic cutting machine
model TATC-10

gallerypdf
0180
Coil winding machine
model FAM-XL

gallerypdf
0201
Coil winding machine rotating shapes
model ASR-12-35-55

Pneumatic system for unloaded coils able to insertine machine
gallerypdf
0202
Automatic coil winding machine
model FG7

Machine for the automatic coil winding construction. Machine particullary adapt where high flexibility and performances are required. The winding flyer and the form axle are numerically controlled; programmable poles divisor and adjustable winding head on vertical and horizontal direction through handwheel. Memorisation of 100 programs with 100 function steps eachone.
galleryvideopdf

0221
Flexible coil winding machine
model FAV2-100

gallery
0234
Rotor layering winding machine
model FARSC-01-30-40

gallerypdf
0260
Rotor winding machine
model FAOR1.01

Machine for the automatic coil winding construction on rotors. Machine particullary adapt where high flexibility and performances are required. The winding flyer and the form axle are numerically controlled; programmable poles divisor and adjustable winding head on vertical and horizontal direction through handwheel. Memorisation of 100 programs with 100 function steps eachone.
galleryvideopdf
0261
Rotor layering winding machine
model FAR-CN

gallerypdf
0262
Coil inserting machine
model IMS6-14

Machine for the automatic insertion of coils on stators, with construction and insertion of closing slot insulating. Machine with inserting and stator blocking axis moved by hydraulic comand. Motorised wedge builder unit with programmable slots number and speed. Insulating paper feeder managed by numerical control with programmable wedges lenght. Mobile carriage for easy loading unloading phase.
gallerypdf
0321
Coil inserting machine
model IMS-24

Machine for the automatic insertion of coils on stators, with construction and insertion of closing slot insulating. Machine with inserting and stator blocking axis moved by hydraulic comand. Motorised wedge builder unit with programmable slots number and speed. Insulating paper feeder managed by numerical control with programmable wedges lenght. Mobile carriage for easy loading unloading phase.
galleryvideopdf
0322
Coil inserting machine
model IMSC7-M-15-20

Machine for the automatic insertion of coils on stators, with construction and insertion of closing slot insulating. Machine with inserting and stator blocking axis moved by hydraulic comand. Motorised wedge builder unit with programmable slots number and speed. Insulating paper feeder managed by numerical control with programmable wedges lenght.
gallerypdf
0341
Coil inserting machine
model IMSC7

Machine for the automatic insertion of coils on stators, with construction and insertion of closing slot insulating. Machine with inserting and stator blocking axis moved by hydraulic comand. Motorised wedge builder unit with programmable slots number and speed. Insulating paper feeder managed by numerical control with programmable wedges lenght.
galleryvideopdf
0340
Vertical coil inserting machine
model MI6.01

Machine for the automatic insertion of coils on stators, with construction and insertion of closing slot insulating. Machine with inserting and stator blocking axis moved by hydraulic comand. Motorised wedge builder unit with programmable slots number and speed. Insulating paper feeder man- aged by numerical control with programmable wedges lenght.
gallerypdf
0360
Group coil winding and inserting machines
model FG7-MI6-01

Machine for the automatic insertion of coils on stators, with construction and insertion of closing slot insulating. Machine with inserting and stator blocking axis moved by hydraulic comand. Motorised wedge builder unit with programmable slots number and speed. Insulating paper feeder managed by numerical control with programmable wedges lenght.
gallerypdf
0361
Automatic coil winding and inserting centre
model TAIV2-M

Machine for the construction and insertion of coils on stators of asynchronous motors. Machine composed by one winding unit and one inserting unit that work in automatic. Tiling unit works with shaped rollers technology obtaining high performances. High flexibility of passing wires manipulation. All brushless axis managed by easy programme numerical control.
galleryvideopdf
0401
Automatic coil winding and inserting centre
model TAIV3-SP

Machine for the construction and insertion of coils on stators of asynchronous motors. Machine composed by two winding units and one inserting unit that work in automatic. Tiling unit works with shaped rollers technology obtaining high performances. High flexibility of passing wires manipulation. All brushless axis managed by easy programme numerical control. Loading unloading device done by pneumatic cylinders.
galleryvideopdf
0411
Automatic coil winding and inserting centre
model TAIV4.02

Machine for the construction and insertion of coils on stators of asynchronous motors. Ma- chine composed by three winding units and one inserting unit that work in automatic. Tiling unit works with shaped rollers technology obtaining high performances. High flexibility of passing wires manipulation. All brushless axis managed by easy programme numerical control .
galleryvideopdf
0420
Simple expander machine
model EMI-01-09-15

Expander tool made in simple version, to expand the windings inside the stator slots using, mobile sectors equipment. Tool with manual hydraulic control operation complete of hydraulic power plant.
gallerypdf
0520
Stator heads expanning machine
model FEVA-11-15-20

Machine to process the expansion and forming of slots and heads for stators of electric motors. Plant adapt to perform inserted stator with phase by phase method and with single phase method. The successive process is the heads insulation and leads connection. Fully automatic machine, complete of number 3 motorized axis managed by numerical controller positioner, that allow the programme of position, speed and push power for each axe. Machine could perform different working cycles on programnor recalled by robot when integrated on automatic island.
galleryvideopdf
0510
Stators head forming machine
model FO2EA-S-10-15

gallerypdf
0631
Stators head forming machine
model FO3EF-M-15-25

gallerypdf
0650
Thermocrimping machine
model FTG-S6-00-01

The thermocrimping was developed to meet the demand for automation in process connections in electrical machinery. The machine is suitable to execute semiautomatic connections between cables, enamelled wires and conductors insulated. The connection is made using as a staple in flat stagnating with g form; the current and applied pressure perform the fusing process.
gallerypdf
0710
Tube fusing machine
model TGT351-01-00-00

The machine for pipe connections represents the development of our knowledge in the field of electrical connections. We have developed equipment can semi-automatically mergers of cables, enamelled wires and conductors. This machine meets a wide variety of connections. It is made with the use of copper connectors orterminals, with inside diameter from 1 to 20 mm.
gallerypdf
0720
Tube fusing machine
model TGT102-01-00-00

The pipe connections for machine manufactures thermal connection wires enamelled copper wire or not, and/or overall cable for sections 2 to 25mm2. This machine uses connectors or cable lugs tinned copper wire for containment.
gallerypdf
0730
Single head lacing machine
modello LAVD1-XL-25-40

gallerypdf
0812
Electric test bench for stators
on end coil winding line

gallerypdf
1001
Technological renovation
for insulating machines

Technological renovation for coils inserting machine on slot for machine model Pavesi, Magnaghi, Comas, Statomat and Clf. Working acticities: complete dismounting of all machine parts. Wash and technical check up of all components. Substitution os all comercial mechanical components, as bearings, packings and belts etc. Complete machine repainting. Machine rebuilding on original technology, with corrections where necessary to reduce at mini- mum the plays. Fitting protection and carters according to standard “en-626” for old machine. Manufacture of a new electric plant with latest technologies. Machine testing with original or new equipment, to verify the machine functionality after the ac- tivities above mentioned. Issue of electric plant documentation.
gallerypdf
0190
Technological renovation
coil winding machines

Technological renovation for coilwinding machine for machines model Pavesi, Magnaghi, Comas, Statomat and Clf. Working activities: complete dismounting of machine in all its parts. Wash and technical check up of all its components as bearings, sleeves, belts, oil pipes, packings etc. Fitting of ground levelling feet and brackets for transportation. Modification for fit a new micro hydraulic power plant inside the machine. Substitution of flyer motor with a last technology brushless motor and digital drive. Complete machine repainting. Machine reassembling, with correction where necessary to reduce or erase the plays. Manufacture of a structure to protect access, also to support the electric box above the machine obtaining easy access during tooling phase. Fitting of new electric plant with last technologies, adding numerical controlled movements for powered performances. Programe of 100 different programs, eachone of 100 steps where insert functions for machine cycle, with high system flexibility. Machine testing with original or new equipment, to verify the functionality after the above mentioned activities. Issue of the documentation for hydraulic, pneumatic, electric plants and user’s manual.
gallerypdf
0290
Technological renovation
coil inserting machines

Technological renovation for coils inserting machine on slot for machine model pavesi, magnaghi, comas, statomat and clf. Working activities: complete dismounting of machine in all its parts; wash and technical check up of all components; substitution of all comercial parts, as bearings, brushes, oil pipes and hydraulic cylinders packings, etc..; Fitting ground levelling feet and brackets for transportation; hydraulic plant overhaul, positioning it behind the machine, replacing all the electrovalves, gen- eral plant overhaul; technological renovation of wedge maker unit, replacing the hydraulic motor with a new electric one managed by position and programmable speed control; substitution of the mechanical paper feeder with a motorised one managed by programable numerical control; complete machine repainting; protections structure preparation, to support also the electric box above the machiine obtabing easy access during tooling; fitting of new electric plant with latest technologies, improving numerical controlled movements, to gain powered perfromances. Programme with 100 different programs eachone of 100 steps, where insert the machine functions, with high system flexibility; machine test with original or new tool, to verify the target of functionality after the above mentioned actions; issue of documentation for hydraulic, pneumatic, electric plant and machine user’s manual.
gallerypdf
0390
Shafts inserting machine on rotors
model IARV2.20.01

Machine for the automatic insertion of shafts on rotors. Hydraulic inserting axle with speed and thrust power regulation. Standard version with stop on limit switches at insertion end on mechani- cal referee.
gallerypdf
4201
Wedges cnc inserting machine
model IZR1.1

Machine for the automatic insertion of wedges on rotors with feeding from vibranting storages. Motorised axis for insertion and divisor, managed by numerical control. Possibility to fit a loading unloading manipulator.
gallerypdf
0171
Robotized assembling & welding machine
model FIAS2S-01-25-35

galleryvideopdf
4101
High flexibility
conveyor system on pallets

galleryvideopdf
3101
Flexible manipulation systems
model FRM 2P/165.01

Flexible manipulation systems represent the latest generation of the most successful robot in the world. The wide variety of loads the pulse and high performance make this robot is the perfect solution for many types of application. The robots are installed on the floor or shelf.
gallerypdf
3601
Top